Areas of Application:
For example, to relieve the musculoskeletal system
Description:
With the assembly lever in different lengths, disassembly work, for example breaking off roof battens, floor boards and sheet metal, can be carried out with relatively little effort. The tool does not have to be driven under the workpiece to be dismantled with a hammer and the workpiece is not damaged as much due to the larger contact surface.
Using the pry bar significantly reduces the strain on the hand-arm system and the back. As there is no need to use a hammer and chisel, shock loads on the hand-arm system are reduced. At the same time, twisting and bending of the spine are significantly reduced. In addition, hand injuries and finger injuries caused by incorrect leverage are avoided.
Using the pry bar significantly reduces the strain on the hand-arm system and the back. As there is no need to use a hammer and chisel, shock loads on the hand-arm system are reduced. At the same time, twisting and bending of the spine are significantly reduced. In addition, hand injuries and finger injuries caused by incorrect leverage are avoided.
Price (without guarantee):
101.75 EUR including VAT (distribution)
Final consumer price
Final consumer price
REHADAT does not sell any products
Please contact the manufacturer or distributor.
Manufacturer:
Pitzl Metallbau GmbH & Co. KG
Siemensstr. 26
84051 Altheim
Telephone:
08703 9346-0
Email:
info@pitzl-connectors.com
Homepage:
https://www.pitzl-connectors.com/
Distributor:
LAYER-Grosshandel GmbH & Co. KG
Klausenburger Str. 15
88069 Tettnang
Telephone:
07542 9300-0
Email:
service@layer-grosshandel.de
Homepage:
https://shop.layer-grosshandel.de/
Technical Data:
Tube length: 1 m
for rafter widths up to: 12 cm
Projection: approx. 12.5 cm
for rafter widths up to: 12 cm
Projection: approx. 12.5 cm
Reference Number:
IW/271290.023
Last Update: 19 May 2025